There are a variety of types of home inspections. Some may be specific based on certain needs or concerns, such as Radon, wood rot or mold.

The two most common terms people hear when it comes to home inspections are either 4-point or wind mitigation.

In this article, we are going to focus on what is involved in a 4-point inspection.

This type of inspection is an assessment of the current condition of a home. It focuses on four major components – roofing, electrical, plumbing and HVAC.

The inspector will examine each of these areas.

As far as HVAC, the inspector will be looking for the condition of the HVAC unit and if there are any signs of leakage.

The electrical inspection will consider the type of wiring being used in the home, especially if it is older structures.

When looking at the plumbing, age is also a factor. Older pipes may be made from material that is more likely to cause leaking problems.

Finally, when it comes to the roof, inspectors will look for shingle damage or cracked tiling, as well as signs of roof leaking inside the home.

One of the most common reasons for a 4-point inspection is insurance coverage. Older homes are often a challenge when it comes to obtaining homeowner’s insurance. But the results of a 4-point inspection can be a significant factor in obtaining insurance.

A 4-point inspection is not the same as a full inspection. Which is more commonly used during the home-buying process to get a more complete picture of the condition of a home.

If your home or one you are considering purchasing is in need of an inspection, a 4-point inspection may be all you need. The best thing you can do is find a qualified inspector who you trust and ask them what kind of inspection you need.